Dafo Fomtec

Request Cart:

0 item(s)

Search the site

You are here:

Fluorine free

Fluorine free foams, often referred to as SFFF (Synthetic Fluorine Free Foam),  foams are predominantly synthetic-based foams based on surfactant blends and in many cases the use of polysaccharides. Fomtec offers a large range of both synthetic-based and protein-based fluorine free foam concentrates. 

  • Enviro ARK

    Fomtec Enviro ARK is a novel multi-purpose alcohol resistant firefighting foam concentrate totally free from fluorinated surfactants and polymers. The unique formulation of Fomtec Enviro ARK enables the foam to rapidly cover burning surfaces and gain control and extinguish the fire. As a result, it is effective against both hydrocarbon fires and polar solvents fuel fires.
  • Enviro USP

    Fomtec Enviro USP is a fluorine-free foam consisting of selected hydrocarbon surfactants, solvents and stabilizers to give optimal fire performance. Fomtec Enviro USP is especially designed to be an effective fluorine-free alternative for sprinkler systems, type II and III discharge devices. Fomtec Enviro USP should be used at 2% with fresh water for low, medium and high expansion discharge devices. For sprinkler systems it should be used in 3% proportioning. For use on class A type fires induction ratio of 0.5-1% is recommended depending on application and discharge device.
  • Enviro AIR

    Fomtec Enviro AIR is a novel fluorine free firefighting foam totally free from fluorinated surfactants and polymers. Fomtec Enviro AIR is especially designed to be an effective fluorine-free alternative for Aircraft Rescue and Fire Fighting (ARFF) fighting class B fires in aviation Kerosine jet fuel such as Jet A 1. Fomtec Enviro AIR should be used at 3% with fresh water for low expansion equipment such as monitors and handlines.
  • Enviro 3x3 Ultra

    Fomtec Enviro 3x3 Ultra is a multi-purpose alcohol resistant fire fighting foam totally free from fluorinated surfactants and polymers. The foaming characteristics of Fomtec Enviro 3x3 Ultra allows the foam to fast spread across the burning liquid and get control of the fire. Fomtec Enviro 3x3 Ultra has been designed to work effectively on both hydrocarbon and polar fires. When applied on polar solvents a strong polymeric membrane is formed and makes it possible for the foam blanket to extinguish effectively. It also works on severe foam destroying liquids such as MTBE. Fomtec Enviro 3x3 Ultra should be used at 3% proportioned solution both on hydrocarbon liquids and polar solvents. When used with sea water the fire performance is reduced.
  • P 3% AR

    Fomtec P3% AR is an alcohol resistant protein foam concentrate (P-ARC) consisting of hydrolysed protein hydrolysate and a blend of hydrocarbon surfactants and polymers, various solvents and stabilisers. All Fomtec P-ARC foam concentrates are formulated totally free of fluorinated substances.
  • Enviro Class A

    Fomtec Enviro Class A is a specially selected blend of high activity hydrocarbon surfactants, solvents and stabilizers for use on class A fuel fires and smaller class B fires. Enviro Class A does not contain any hazardous substances and does not require any special labelling when transported. On the Qualified Products Listed (QPL) of the US Forest Service after full certification testing in accordance to Forest Service Specification 5100-307a. Conforms to NFPA 18 and NFPA 1150
  • Enviro Class A Super

    Fomtec Enviro Class A Super is a specially selected blend of high activity hydrocarbon surfactants, solvents and stabilisers for use on class A fuel fires and smaller class B fires. Enviro Class A Super does not contain any hazardous substances and does not require any special labelling when transported.
  • Enviro eMax

    Fomtec Enviro eMax is a new generation of high performance fluorine free alcohol resistant multipurpose foam concentrate. It is totally free from fluoro surfactants and polymers and consists of a novel blend hydrocarbon surfactants, blended with various solvents, and stabilizers. Fomtec Enviro eMax have been designed to be used as low, medium and high expansion.
  • Enviro 3% ICAO

    Fomtec Enviro 3% ICAO is a synthetic firefighting foam totally free from fluorinated surfactants and polymers. The foaming characteristics of Fomtec Enviro 3% ICAO allow the foam to fast spread across the burning liquid and get control of the fire. As a result, it is effective against hydrocarbon fires and with the presence of special polymers it is also effective against polar solvents. Fomtec Enviro 3% ICAO should be used at 3% proportioned solution on hydrocarbon liquids.
  • Enviro 3x3 Plus

    Fomtec Enviro 3x3 Plus is a multi-purpose alcohol resistant fire fighting foam totally free from fluorinated surfactants and polymers. The foaming characteristics of Fomtec Enviro 3x3 Plus allows the foam to fast spread across the burning liquid and get control of the fire. Fomtec Enviro 3x3 Plus has been designed to work effectively on both hydrocarbon and polar fires. When applied on polar solvents a polymeric membrane is formed and makes it possible for the foam blanket to extinguish effectively. It also works on severe foam destroying liquids such as MTBE. Fomtec Enviro 3x3 Plus should be used at 3% proportioned solution both on hydrocarbon liquids and polar solvents. When used with sea water the fire performance is reduced.
  • Enviro 3x6 Plus

    Fomtec Enviro 3x6 Plus is a multi-purpose alcohol resistant fire fighting foam totally free from fluorinated surfactants and polymers. The foaming characteristics of Fomtec Enviro 3x6 Plus allows the foam to fast spread across the burning liquid and get control of the fire. Fomtec Enviro 3x6 Plus has been designed to work effectively on both hydrocarbon and polar fires. When applied on polar solvents a polymeric membrane is formed and makes it possible for the foam blanket to extinguish effectively. It also works on severe foam destroying liquids such as MTBE. Fomtec Enviro 3x6 Plus should be used at 3% proportioned solution on hydrocarbon liquids and 6% on polar solvents. When used with sea water the fire performance is reduced.
  • Enviro 6x6 Plus

    Fomtec Enviro 6x6 Plus is a multi-purpose alcohol resistant fire fighting foam totally free from fluorinated surfactants and polymers. The foaming characteristics of Fomtec Enviro 6x6 Plus allows the foam to fast spread across the burning liquid and get control of the fire. Fomtec Enviro 6x6 Plus has been designed to work effectively on both hydrocarbon and polar fires. When applied on polar solvents a polymeric membrane is formed and makes it possible for the foam blanket to extinguish effectively. It also works on severe foam destroying liquids such as MTBE. Fomtec Enviro 6x6 Plus should be used at 6% proportioned solution both on hydrocarbon liquids and polar solvents. When used with sea water the fire performance is reduced.
  • LS xMax

    Fomtec LS xMax is a new generation of high performing, multi-purpose foam concentrate. It is consisting of hydro-carbon surfactants blended with various solvents, preservatives and stabilizers. Fomtec LS xMax is free from fluorine surfactants. Fomtec LS xMax have been designed to be used as high expansion, medium expansion and low expansion foam systems.
  • LS EXP

    Fomtec LS EXP is an effective high expansion foam concentrate for use in any High expansion system. Fomtec LS EXP mixed with water and converted into finished foam via low, medium or high expansion foam making equipment combats fires by engulfing the area, restricting the supply of oxygen, cooling of the liquid surface, and the suppression of flammable gases evaporating from the hot liquid surface. Used as high expansion in complete filling of enclosed rooms the foam creates an inert atmosphere. Fomtec LS EXP should be used between 2% and 3% concentration in fresh or sea water if medium or high expansion foams are required depending on equipment used.
  • MB -20

    Fomtec MB -20 is a blend of high activity, synthetic, fatty alcohol sulphates, solvents and stabilisers. Fomtec MB -20 mixed with water and converted into finished foam via low, medium or high expansion foam making equipment combats fires by engulfing the area, restricting the supply of oxygen, cooling of the liquid surface, and the suppression of flammable gases evaporating from the hot liquid surface. Used as high expansion in complete filling of enclosed rooms the foam creates an inert atmosphere. Fomtec MB-20 should be used between 2% and 6% concentration in fresh or sea water if medium or high expansion foams are required depending on equipment used.
  • MB 15

    Fomtec MB 15 is a blend of high activity, synthetic, fatty alcohol sulphates, solvents and stabilisers. Fomtec MB 15 mixed with water and converted into finished foam via low, medium or high expansion foam making equipment combats fires by engulfing the area, restricting the supply of oxygen, cooling of the liquid surface, and the suppression of flammable gases evaporating from the hot liquid surface. Used as high expansion in complete filling of enclosed rooms the foam creates an inert atmosphere. Fomtec MB 15 should be used at 3% concentration in fresh or sea water if medium or high expansion foams are required depending on equipment used.
  • MB 5

    Fomtec MB 5 is a blend of high activity, synthetic, fatty alcohol sulphates, solvents and stabilisers. Fomtec MB 5 mixed with water and converted into finished foam via low, medium or high expansion foam making equipment combats fires by engulfing the area, restricting the supply of oxygen, cooling of the liquid surface, and the suppression of flammable gases evaporating from the hot liquid surface. Used as high expansion in complete filling of enclosed rooms the foam creates an inert atmosphere. Fomtec MB 5 should be used between 2% and 6% concentration in fresh or sea water if medium or high expansion foams are required depending on equipment used.
  • P 3%

    Fomtec P 3% is protein foam produced from a carefully controlled blend of hydrolised protein, foam boosters, stabilisers and preservatives. This ensures the production of stabilised fluid foam. Foam produced by foam making equipment is tough, stable, heat resistant and covers the burning hydrocarbon fuel surface rapidly. Once fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re-ignition and provides excellent protection against 'burn-back' should any inaccessible pockets of fire remain. Fomtec P 3% should be used as a 3% proportioned solution in fresh or sea water. The correct proportioning or mixture ratio is 3 parts of concentrate and 97 parts of water.
  • P 6%

    Fomtec P 6% is protein foam produced from a carefully controlled blend of hydrolised protein, foam boosters, stabilisers and preservatives. This ensures the production of stabilised fluid foam. Foam produced by foam making equipment is tough, stable, heat resistant and covers the burning hydrocarbon fuel surface rapidly. Once fire extinction has been achieved the high stability of the foam blanket ensures against the risk of re-ignition and provides excellent protection against 'burn-back' should any inaccessible pockets of fire remain. Fomtec P 6% should be used as a 6% proportioned solution in fresh or sea water. The correct proportioning or mixture ratio is 6 parts of concentrate and 94 parts of water.
  • Trainer E-lite

    Fomtec Trainer E-Lite is a carefully selected blend of natural origin surfactants, solvents and stabilisers and is 100% biodegradable. It is designed for training purpose on all class A and B fires with minimum environmental impact. Fomtec Trainer E-Lite does not contain any hazardous substances and does not require any special labelling when transported.