Dafo Fomtec

Request Cart:

0 item(s)

Search the site

Fixed

  • Bor LB low expansion foam spinkler nozzle

    Bor LB foam nozzle for use in foam spry systems.
  • Bor M medium expansion foam sprinkler nozzle

    Bor M is a medium expansion foam nozzle for fixed systems.
  • SME medium expansion foam branchpipe

    SME is a medium expansion foam branchpipe for fixed systems.
  • Bele L-100 high expansion foam generator

    Bele L-100 is a high expansion generator that will produced large quantities of expanded foam enabeling the total flooding of enclosed areas such as warehouses, production halls or engine rooms.
  • Bele S-250/400 high expansion foam generator

    Bele S is a high expansion generator that will produced large quantities of expanded foam enabeling the total flooding of enclosed areas such as warehouses, production halls or engine rooms.
  • Bele S-800 high expansion foam generator

    Bele S is a high expansion generator that will produced large quantities of expanded foam enabeling the total flooding of enclosed areas such as warehouses, production halls or engine rooms.
  • High expansion foam systems

    High Expansion foam systems are used for total flooding of enclosed rooms sush as warehouses, production areas, aircraft Hangars or shipboard engine rooms etc. Total flooding is achived by the use of High Expansion foam generators together with special high expansion foam concnetrates and water, capable of expanding the foam/water solution at a ratio of 500-1200 times.
  • Skade high back pressure foam generator

    The Skade high back pressure foam generator is an air aspirating discharge device designed to deliver foam directly onto or below the surface of flammable or combustible liquid in a fixed tank protection system. Skade is available 2x3” up to 4”x6” body size and inlet flange (DIN or ANSI) and flow rates up to 2000 lpm. Skade foam generators are installed on the outside of flammable liquid storage tanks.
  • Tyr foam chamber

    Foam Chambers are used for fixed roof storage tank protection and generates a low expansion foam that are being applied to the surface of the flammable liquid. They are equipped with breacking glass seal that prevents flammable vapours from escaping out through the chamber. The Tyr foam chamber is an air aspirating discharge device designed to deliver foam directly onto the surface of flammable or combustible liquid in a fixed tank protection system. Tyr is available 2x3” up to 4”x8” body size and inlet flange (DIN or ANSI) and flow rates up to 2000 lpm. Tyr foam chambers are installed on the outside of flammable liquid storage tanks just below the roof joint.
  • Ve fixed foam maker

    Fixed Foam makers are used for storage tank protection and will generate low expansion foam that are being applied over the top on a floating roof storage tank or to a dike protection system.
  • Aske foam pourer

    Aske foam pourer is a discharge device outlet designed to apply expanded foam gently onto the surface of flammable or combustible liquid. Aske is available from 3” up to 10” inlet flange (DIN or ANSI).
  • Hod fixed foam maker

    Fomtec Hod type fixed foam maker is used for the protection of vertical open top floating roof storage tanks. It consists of a fixed foam maker and "Splash board" which delivers the foam gently into the rimseal area.